Buy scaffolding crossbars (O-shaped, U-shaped, decking crossbars)
Live stock from our inventory management system: 1,824 scaffolding parts in scaffolding crossbars in stock – second-hand and inspected, up to 70% cheaper than new items. Green = available immediately from stock, orange = available on request.
Parts order
Used parts from stocknur Lagerware · sofort lieferbar›
New parts from the CETRAC catalogueSPEED available to order now · MGS, MODUX from 2027 · DIBt approval applied for›
Order scaffolding parts – enter quantities, done
- 1 Select parts
- 2 Check preview
- 3 Send request
Scaffolding braces, or cross-braces, connect vertical and horizontal scaffolding components and play a key role in ensuring the stability of the entire structure. They are available in various lengths and materials, allowing for flexible adaptation to a wide range of scaffolding configurations.
Classification / Technical significance
Depending on the system, scaffold braces serve as:
- Load-bearing components,
- Connection and bracing element,
- Supports for guardrails, brackets or decks.
They ensure that scaffolding remains dimensionally stable, strong and true to size – particularly at greater heights or under varying loads.
Typical applications for scaffolding braces:
- connect standard posts or scaffolding frames at specific grid intervals
- brace the scaffolding frames horizontally
- serve as a fixing point for:
Guardrails, diagonal braces, brackets, decking, safety netting or tarpaulin barriers
Scaffold braces play an important role in:
- Inner and outer fields
- Bracing panels
- Connection of scaffolding levels to access points or special components
Scaffolding braces for maximum stability – available in various lengths and for immediate delivery
Horizontal bracing bars
- Standard strut for horizontal stabilisation
- Connection between two vertical components
System braces for modular scaffolding
- Ledgers with a defined connection geometry for module nodes
- enable flexible geometries and free combinations
Handrail crossbar / Side protection bar
- Used for fitting side guards and fall protection systems
- Can also provide support points for mesh or skirting board systems
Support beam / Bearing beam
- Ledgers on which system cladding or brackets are mounted
- Secure loads horizontally
Special brackets (transition / masonry / façade)
- designed for specific geometric situations
- Used for projections, cable routing or irregular building structures
Scaffolding cross-braces: effort / costs / benefits
All scaffolding crossbars are available for immediate delivery:
Calculate scaffolding area
Do you assemble your scaffolding from individual parts? With our EasyFlow scaffolding area calculator, you can first work out the scaffolding area you need – so you’ll know exactly how many ledgers and other components you’ll require. It’s free, with no obligation, and takes just a few seconds.
FAQ – Scaffolding braces
They stabilise scaffolding horizontally and – together with the horizontal braces – connect key joints to one another.
No. Ledgers vary considerably depending on the system, the type of fitting and their function.
In most cases, no. Systems are manufacturer-specific, so ledgers from different manufacturers rarely fit together.
Clamping bars are designed to hold decks in place. However, the actual load-bearing capacity and load class are specific to the system and depend on the manufacturer’s specifications.
Handrail crossbars are primarily intended to provide lateral protection – not to transfer loads.
In the case of projections, cable routing, irregular façades or structurally complex surfaces.