Scaffolding Anchors
Scaffolding anchors are the safety-critical connection between the building and the scaffold structure. They provide load transfer and stability and prevent the scaffold from tipping or slipping - regardless of the construction progress. CETRAC supplies certified anchoring solutions for almost every scaffold system and every structural situation.
Why scaffolding anchors are indispensable
A stably anchored scaffold protects workers, materials and construction progress.
High-quality scaffolding anchors ensure:
- Load transfer directly into the building
- Maximum lateral stability
- Reliable fastening even under wind loads
- Safe assembly of subsequent scaffold levels
Typical variants of scaffolding anchors:
→ Ring screws / eye bolts
For many standard applications, ideal for facade scaffolds.
→ Press-in anchors / bonded anchors
For solid substrates and high loads.
→ Long-shaft anchors
For thick insulation layers or difficult substrates.
→ Special solutions
For unusual building materials or special structures.
Scaffolding anchors - assembly & safety
The following basic rules apply when installing scaffolding anchors:
- Check that the substrate is load-bearing
- Choose the anchor position according to the scaffold plan
- Only use approved, certified anchors
- Observe tightening torques
- Regular visual checks during the construction phase
All scaffolding anchors available immediately
CETRAC range: scaffolding anchors
| Category | Subtype | Designation | Length / size |
|---|---|---|---|
| Scaffolding anchor | Anchor | Blitz anchor | 0.69 m |
| Scaffolding anchor | Anchor | Allround anchor | 0.80 m |
| Scaffolding anchor | Anchor | End anchor TS | - |
| Scaffolding anchor | Anchor | Anchor holder 2 AH | - |
| Scaffolding anchor | Scaffold holder | Adjustable scaffold holder | approx. 0.30 m |
| Scaffolding anchor | Scaffold holder | Scaffold holder | 0.50 m |
| Scaffolding anchor | Scaffold holder | Scaffold holder | 0.70 - 0.85 m |
| Scaffolding anchor | Scaffold holder | Scaffold holder | 0.90 - 1.10 m |
| Scaffolding anchor | Scaffold holder | Scaffold holder | 1.30 - 1.50 m |
| Scaffolding anchor | Scaffold holder | Scaffold holder | 1.60 - 1.90 m |
| Scaffolding anchor | Scaffold holder | Scaffold holder | 2.00 - 3.30 m |
| Scaffolding anchor | Special | Allround scaffold holder (new) | - |
| Scaffolding anchor | Special | Adjustable scaffold holder | - |
Your advantages with CETRAC
- International expertise through our multilingual team
- Fast technical advice
- A wide range of compatible anchor systems
- Reliable stock levels & transparent processes
Calculate your scaffolding area
Putting your scaffold together from individual parts? With our EasyFlow scaffolding area calculator, you first work out the required scaffold area - so you know exactly how many anchors and other components you need. Free of charge, with no obligation and in a matter of seconds.
FAQ - Scaffolding anchors
For insulated ETICS facades, long-shaft anchors or special ETICS anchors are preferred, to penetrate the insulation and ensure a firm hold in the load-bearing substrate.
For a facade scaffold, this depends on the scaffold type, building height and wind load zone. The exact number is defined in the scaffold or anchoring plan.
No. Anchors showing wear and damage must not be used any further for safety reasons.
Typically suitable for secure anchoring: concrete, solid brick, sand-lime block, load-bearing masonry.
Not suitable: crumbling old render, hollow-chamber materials without anchoring approval.
Yes - they are a central safety-relevant element of every standard-compliant scaffold structure.
Only qualified personnel familiar with the scaffold system, the anchors and the respective assembly specifications.