Where can you buy scaffolding and formwork cheaply?
Anyone looking for formwork and scaffolding for construction projects often faces a choice: expensive new material straight from the manufacturer, or risky private purchases? For professionals who have to calculate, the answer is: inspected used material from a trade supplier.
The 3 best ways to save when buying:
1. Used instead of new – the instant discount
Manufacturers such as PERI, Doka, Hünnebeck or Layherbuild systems to last for decades. A used steel frame loses a lot of its price after the first use, but hardly any of its technical value. With us you buy this brand quality often 30% to 60% cheaper than the list price of new material.
2. Package deals & stock lots
You buy cheapest when you take entire lots. We regularly offer pre-configured packages (e.g. 100 m² of wall formwork incl. accessories or complete facade scaffold runs) that are priced well below buying individually.
3. Trade supplier instead of online auction
On auction platforms you often find supposed bargains. But beware: without technical inspection you risk safety defects or missing, expensive accessories. With us you buy safely: every part is workshop-inspected, cleaned and ready for immediate use.
Why CETRAC is the first port of call for bargain hunters:
We combine the low price of used material with the service of a trade supplier. With us you get:
- Best price guarantee for brand-name material: we calculate hard so you get the best deal on Doka, Peri, Rux & co.
- Individual offers: send us your parts list or drawing – we put together the cheapest mix of used material for you.
- Transparent conditions: from “site-ready used material” to “fully reconditioned with new formwork facing” – you decide how much you want to save.
The following table shows the average savings when buying inspected used material compared with the manufacturers’ list prices.
| System / lot | Unit | New price (approx. list) | CETRAC used price | Your savings |
|---|---|---|---|---|
| Doka Framax Xlife | per m² | approx. 550.00 € | from 245.00 € | - 55% |
| Peri TRIO ST | per m² | approx. 520.00 € | from 230.00 € | - 56% |
| Hünnebeck MANTO | per m² | approx. 480.00 € | from 195.00 € | - 59% |
| Doka Eurex 20 (300) | per pc. | approx. 85.00 € | from 38.00 € | - 55% |
| RUX Super 65 frame | per pc. | approx. 95.00 € | from 45.00 € | - 52% |
| H20 formwork beam | per lin. m | approx. 14.50 € | from 6.50 € | - 55% |
Note: the prices are guide values for used, function-tested material. Prices vary depending on quantity and current stock at www.cetrac.com.
Request a non-binding offer now!
Stop searching and start building. Contact us today for our current stock list and daily prices.
Send an enquiry now View current used offers
FAQ: buying used scaffolding and formwork cheaply
The best option for professionals who have to calculate is inspected used material from a trade supplier — instead of expensive new material straight from the manufacturer or risky private purchases.
Brand-name material from manufacturers such as PERI, Doka, Hünnebeck or Layher is often 30% to 60% – even up to 70% – cheaper at CETRAC than the list price of new material. See the price examples here
Yes, if it comes from a trade supplier. At CETRAC every part is workshop-inspected, cleaned and ready for immediate use — unlike auction platforms, where technical inspections are missing and safety defects or missing accessories can be a risk.
Yes. CETRAC regularly offers pre-configured packages, e.g. 100 m² of wall formwork incl. accessories or complete facade scaffold runs, priced well below buying individually.
Auction platforms often show supposed bargains — but without technical inspection you risk safety defects or missing, expensive accessories.
Yes. Send in your parts list or drawing and CETRAC will put together the cheapest mix of used material – or complete new material, whichever suits you better!
CETRAC offers transparent conditions: from “site-ready used material” and “fully reconditioned with new formwork facing” up to complete new material — the customer decides how much to save.